What Should Be Used to Screw on Broadheads? Sound Advice to Follow

Riveting, tying, and gluing provide the best solutions when you consider what should be used to screw on broadheads.

But why is bow-hunting gaining such popularity?

DETACHABLE BROADHEAD BLADES

If your blades become blunt or damaged, detachable broadhead blades remain the answer because the design allows for easy replacement. The blades themselves are removable and not the entire broadhead.

Because detachable broadheads remain so versatile, they form the perfect choice if your bow is not too heavy. However, if you do have a heavy bow, then the expandable bowhead is the ideal solution. For old school enthusiasts, the fixed blade offers versatility and lends an authentic feel to the experience.

There are several ways of attaching your broadheads, and in this next section, we shall delve deeper into the various methods.

Riveting your broadhead

Riveting in your broadhead is a simple technique and relatively straightforward. Because you only need a broadhead wrench and a specially designed screw, you may achieve excellent results quickly and effectively.

The broadhead manufacturer will supply detailed instructions for screwing in your broadhead to the shaft. Consequently, this technique enables you to replace your broadhead out in the field should the need arise.

Tying your broadhead

You may tie your broadhead to the shaft using a unique ring and nylon rope. This method remains one of the oldest types for attaching a broadhead to a shaft and dates back to the time when the bow first came into being. However, you should note that tying your broadhead to the shaft constitutes an inferior fixing because the blade might come unstuck.

Gluing your broadhead

Gluing your broadhead to the shaft remains one of the most effective ways to fix your broadhead. Out of all the methods we have explored, gluing is the most effective way when you consider what should be used to screw on broadheads. Consequently, this method proves so effective that your broadhead should remain intact even while penetrating tough targets.

There remains little doubt that gluing your broadhead to the shaft is the most effective and efficient way of achieving an excellent fix. All the methods we have explored constitute viable and trusted methods used by hunters and archers all over the world. However, glue is the favored method.

There are two ways to glue your broadheads to the shaft. You may use cold glue or ​hot glue However, both methods have their good points and their bad points.

Hot glue

Hot glue remains one of the most popular ways when you think of what should be used to screw on broadheads. Because hot glue is affordable, flexible, and extremely versatile, many archers and hunters employ the method to fix their broadheads.

Additionally, due to the nature of hot glue, you may easily remove it using a heater should you wish. Because of this, if you plan to change your broadheads often, then hot glue constitutes the perfect means to screw them on. Furthermore, fixed broadheads that don’t have a screw-on design benefit greatly by using hot glue.

The benefits of using hot glue

Using the hot glue method for screwing on your broadheads comes with a plethora of benefits. We have already seen how you may easily remove the hot glue to replace the broadhead, which is one of the most significant benefits.

Hot glue remains easy to use and forms an effective method to employ. Also, you may align the arrow and the broadhead before the glue has time to set.

Hot glue is a tried and tested method when you consider what should be used to screw on broadheads and remains a favorite amongst hunters and archers.

The downside of using hot glue

Because you use a heater to remove the hot glue, the broadhead may become damaged. As a result, you should take great care while heating the shaft and the glue.

Additionally, hot glue is, well, hot. Therefore, you run the risk of burning yourself. Hot glue can cause very nasty burns. As a consequence, you must exercise extreme caution when using hot glue.

Use a low heat source to melt the glue as this type of heater is unlikely to damage the steel of the shaft. Some broadheads don’t have a ceramic coating to protect them, so when you remove the broadhead, take special care not to damage the end part.

An alcohol burner provides the perfect type of heater by which to melt the hot glue when removing it. However, you must avoid using a regular torch because you can easily damage the tip of your broadhead.

An alcohol burner provides just enough heat to remove the blade quickly. Also, this type of gentle heat will not alter the composition of the glue.

Ideally, use an alcohol burner to achieve the perfect, gentle heat. Alternatively, you may use a glue gun. The aim is to melt the glue just enough so that it can merge effectively with the broadhead.

However, you must take care not to overheat the broadhead while you attach your arrow. You need the glue to end up between both of them without overheating the broadhead. Steel will anneal if overheated, which results in the softening of the metal. Consequently, this could ruin the broadhead.

The method of using hot glue is easy and effective. Also, it allows for easy removal of the broadhead should you wish. By paying close attention to the temperature of the steel, you should avoid any of the pitfalls we have discussed.

However, because cold glue is much more of an instant fix, you don’t have time to align your arrow and broadhead before the glue goes off. Also, cold glue represents a permanent fix. Therefore, this method doesn’t allow you to change the broadhead like the hot glue option.

If you opt for the cold glue, then ensure you align the arrow and broadhead before the glue sets. Because the glue sets so quickly, you will need to be faster than the glue to align everything properly.

Because super glue sets very quickly, you must ensure you don’t get any on your hands and fingers. Otherwise, you run the risk of gluing your fingers together. I know from experience how painful that is!

Cold glue offers an instant, speedy fix. While out in the field, this may prove a great advantage when you require a quick broadhead fix.

The sticky benefits

Unlike hot glue, you don’t need an array of equipment to achieve the fix. Also, as long as you are careful with the super glue, it remains a safe and effective method to employ.

Also, unlike hot glue, you will not damage your bow using cold glue. Additionally, the fix is instant.

Don’t come unstuck

Once the glue is on the broadhead, you cannot remove it. Consequently, cold glue represents a one-time fix. Due to the chemical nature of super glue, it may make the broadhead brittle. If in doubt, test one before you treat them all!

Because cold glue sets very quickly, you may experience a little difficulty aligning your arrow with the broadhead. It is worth practicing the technique with old equipment before you progress to the finished products.

Durability remains a critical factor in successful archery and hunting. When purchasing your broadheads, always go for the quality.

Now we know about the three different types of broadheads and the methods employed to fix them. Riveting, tying, and gluing remain the best tried and tested ways to use when you consider what should be used to screw on broadheads. Also, as always, a little care and patience will ensure a safe and effective job whichever method you choose.

Do you like to go hunting? Do you have any hints and tips to share with us about fixing broadheads? Why not leave a comment in the space below and share your knowledge with us?

We look forward to hearing from you.